Quozl's Light Switch

11th September 2007

Update - Layout Fix

Thanks to James Eichele for finding that the labels for resistors R1 and R2 were reversed, along with the labels for capacitors C3 and C4. He submitted schematic changes, which are effective below.

9th October 2006

Update - 5cm Layout

A layout for a 5cm wide PCB was created. No component designators on this version, and there is copper to the board edge.

as PDF for viewing, (multi page, take care),
as PostScript for printing, (multi page, take care),
as original for use by pcb,

12th August 2006

ls - Light Switch

A microcontroller circuit for interfacing a passive infra-red motion detector to a set of room lights.

Schematic

as PNG format for viewing now,
as original for use by gschem,

Printed Circuit Board

as PostScript for printing,
as original for use by pcb,

Source Code

assembly source code for use by gpasm,
build instructions for use by GNU make,

Repository

darcs repository (see below for instructions).

Using Darcs

Darcs is a distributed revision control system by David Roundy designed to replace centralised CVS. The source is provided via darcs to encourage contributions.

install darcs : apt-get install darcs

checkout initial copy : darcs get http://quozl.linux.org.au/ls
(this creates a directory ls in your current directory)

propose a change : darcs record darcs send
(this sends a mail to me with your changes)

update : darcs pull
(this updates your directory with changes made by me and others)

install darcs :	`apt-get install darcs`
checkout initial copy :	`darcs get http://quozl.linux.org.au/ls` (this creates a directory `ls` in your current directory)
propose a change :	`darcs record darcs send` (this sends a mail to me with your changes)
update :	`darcs pull` (this updates your directory with changes made by me and others)

| quozl@us.netrek.org | up |